top of page

HOW TO SPOT STORM DAMAGE

While these steps can help you spot potential damage, it’s always safest to avoid climbing onto the roof and instead rely on binoculars or take photos from the ground. After you’ve done this preliminary check, reach out to us for a full professional inspection. We’ll confirm any issues and provide guidance on the next steps!

​1. Roof Damage: 

  •  Missing or Lifted Shingles: Look for any shingles that are missing, lifted, or look cracked. This is a common sign of wind damage.

  • Granule Loss: Check your gutters and downspouts for an unusual amount of shingle granules, which look like coarse sand. Hail can knock these off, leaving bald spots on shingles.

  • Dents and Bruising: If it’s safe to get a close look, examine shingles for small round dents or soft, bruised areas. These can be signs of hail damage.

 

2. Exterior Walls and Siding:

  • Dents and Cracks**: Check your siding, especially on the side that faced the storm. Look for dents, cracks, or areas where the paint has chipped off, which are indicators of hail or wind damage.

  • Discoloration or Marks**: Sometimes hail can leave faint white or gray marks on darker surfaces.

 

3. Gutters and Downspouts:

  • Dents and Bent Areas**: Check for dents, bends, or tears in your gutters and downspouts. Hail can leave visible marks, and wind can pull or damage gutter sections.

  • Leaks**: Notice any leaks or areas where the gutters seem to sag or pull away from the house.

 

4. Windows and Screens:

  • Cracks or Broken Glass**: Inspect all windows for cracks, chips, or even small holes. These can be caused by wind-blown debris or hail.

  • Damaged Screens**: Look for any tears or holes in the window screens, which can indicate hail impact.

 

5. Outdoor Equipment:

  • Air Conditioners and Fences**: Look at metal air conditioning units for dents, especially on the top and sides. Fences, especially wooden ones, may have dents, cracks, or chipped paint.

 

6. Roof Edge and Flashing:

  • Lifted or Bent Metal: If you can see the edges of your roof, check for bent or lifted flashing (the metal pieces that seal roof joints). Strong winds often affect these areas first.

bottom of page